|author||Vincent Sanders <email@example.com>||2009-06-28 18:32:47 +0000|
|committer||Vincent Sanders <firstname.lastname@example.org>||2009-06-28 18:32:47 +0000|
Make framebuffer port use libnsfb
svn path=/trunk/netsurf/; revision=8122
Diffstat (limited to 'Docs')
1 files changed, 50 insertions, 55 deletions
diff --git a/Docs/BUILDING-Framebuffer b/Docs/BUILDING-Framebuffer
index 540dff9da..8dd0b0007 100644
@@ -17,11 +17,6 @@
Others cannot be automatically detected from the Makefile, so you
will either need to install the dependencies, or set them to NO.
- One option it is vitally important to set is the Framebuffer ports
- frontend type by setting the NETSURF_FB_FRONTEND variable. The port
- can run on a number of simple framebuffer implementations including
- the linux framebuffer and an SDL surface.
You should then obtain NetSurf's dependencies, keeping in mind which options
you have enabled in the configuration file. See the next section for
@@ -30,58 +25,19 @@
$ make TARGET=framebuffer
- If that produces errors, you probably don't have some of NetSurf's build
- dependencies installed. See "Obtaining NetSurf's dependencies" below. Or turn
- off the complaining features in your Makefile.config. You may need to "make clean"
- before attempting to build after installing the dependencies.
+ If that produces errors, you probably don't have some of NetSurf's
+ build dependencies installed. See "Obtaining NetSurf's dependencies"
+ below. Or turn off the complaining features in your
+ Makefile.config. You may need to "make clean" before attempting to
+ build after installing the dependencies.
- Run NetSurf by executing the "nsfb" shell script:
+ Run NetSurf by executing the "nsfb" program:
- This script makes it easy to run the nsfb binary from the build tree. It
- sets up some environment variables which enable NetSurf to find its
- Selecting a frontend and appropriate options
+ The NETSURFRES environment variable may require setting to enable
+ NetSurf to find its resources.
- The framebuffer port can operate on a number of frontends. A
- frontend in this context is simply the combination of input and
- output devices. A frontend output device may be any linearly mapped
- area of memory. The framebuffer may be treated as values at 32, 16
- or 8 bits per pixel. The input device is typically selected to
- complement the output device and is completely specific to the
- There are several configuration options which may influence the
- framebuffer frontends. These are:
- fb_refresh - The refresh rate (for physical displays)
- fb_depth - The depth (in bits per pixel) of the framebuffer
- window_width - The width of the framebuffer
- window_height - The height of the framebuffer
- The defaults are for 800 by 600 pixels at 16bpp and 70Hz refresh rate.
- There are currently four frontends:
- linux Output to a Linux framebuffer and input from linux input
- event device nodes. The output device is specified with
- the fb_device option which defaults to /dev/fb0 . The
- input nodes are searched for in the path specified by the
- fb_input_devpath option which defaults to /dev/input/
- sdl The SDL frontend is a straightforward port to the SDL library
- which abstracts the input and output from the application and has
- been targeted to several operating systems.
- vnc The VNC server frontend uses the libvncserver library to
- provide a straightforward unsecured VNC server, multiple
- clients may connect.
- able Output to the Simtec ABLE bootloader framebuffer and input
- from its input device node.
@@ -138,10 +94,10 @@
and prior the following patch is necessary.
---- framebuffer/fb_font_freetype.c (revision 6750)
-+++ framebuffer/fb_font_freetype.c (working copy)
+--- framebuffer/font_freetype.c (revision 6750)
++++ framebuffer/font_freetype.c (working copy)
@@ -311,6 +311,7 @@
@@ -184,6 +140,34 @@ Index: framebuffer/fb_font_freetype.c
+ Selecting a frontend and appropriate options
+ The framebuffer port interfaces to its input and output devices
+ using the NetSurf Framebuffer library (libnsfb). This library
+ provides an abstraction layer to input and output devices.
+ The frontend used by libnsfb is selected by using the -fe switch to
+ netsurf when executed. A frontend in this context is simply the
+ combination of input and output devices.
+ A frontend output device may be any linearly mapped area of
+ memory. The framebuffer may be treated as values at 32, 16 or 8 bits
+ per pixel. The input device is typically selected to complement the
+ output device and is completely specific to the frontend.
+ There are several configuration options which may influence the
+ framebuffer frontends. These are:
+ fb_refresh - The refresh rate (for physical displays)
+ fb_depth - The depth (in bits per pixel) of the framebuffer
+ window_width - The width of the framebuffer
+ window_height - The height of the framebuffer
+ The defaults are for 800 by 600 pixels at 16bpp and 70Hz refresh rate.
+ The documentation of libnsfb should be consulted for futher
+ information about supported frontends and their configuration.
Obtaining NetSurf's build dependencies
@@ -223,6 +207,17 @@ Index: framebuffer/fb_font_freetype.c
configured to use libpng instead of libmng. If you wish to do this, install
the libpng development package instead.
+ The NetSurf framebuffer library provides the underlying interface to
+ the underlying input and output devices.
+ You can check it out from svn://svn.netsurf-browser.org/trunk/libnsfb
+ To build and install it:
+ $ sudo make install