summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorVincent Sanders <vince@kyllikki.org>2017-09-16 11:59:01 (GMT)
committer Vincent Sanders <vince@kyllikki.org>2017-09-16 11:59:01 (GMT)
commit3749e6a9e8f28a398dfa814b28e3928167f94873 (patch)
treec4023c9aaaae14084508efe87a3860476d9d814c
parent4b5012317ee8fb905b427cc1ca129e6b2451d66e (diff)
downloadtoolchains-3749e6a9e8f28a398dfa814b28e3928167f94873.tar.gz
toolchains-3749e6a9e8f28a398dfa814b28e3928167f94873.tar.bz2
current debian stretch patch seems to copy amigaos.sc
-rw-r--r--ppc-amigaos/recipes/patches/binutils/missing-files.p531
1 files changed, 1 insertions, 530 deletions
diff --git a/ppc-amigaos/recipes/patches/binutils/missing-files.p b/ppc-amigaos/recipes/patches/binutils/missing-files.p
index be93e0f..7911090 100644
--- a/ppc-amigaos/recipes/patches/binutils/missing-files.p
+++ b/ppc-amigaos/recipes/patches/binutils/missing-files.p
@@ -12489,533 +12489,4 @@
+ ${LDEMUL_NEW_VERS_PATTERN-NULL}
+};
+EOF
---- /dev/null 2015-09-06 08:42:34.091999986 +0100
-+++ ld/scripttempl/amigaos.sc 2016-01-03 01:46:50.663001071 +0000
-@@ -0,0 +1,527 @@
-+#
-+# Unusual variables checked by this code:
-+# NOP - four byte opcode for no-op (defaults to 0)
-+# NO_SMALL_DATA - no .sbss/.sbss2/.sdata/.sdata2 sections if not
-+# empty.
-+# SMALL_DATA_CTOR - .ctors contains small data.
-+# SMALL_DATA_DTOR - .dtors contains small data.
-+# DATA_ADDR - if end-of-text-plus-one-page isn't right for data start
-+# INITIAL_READONLY_SECTIONS - at start of text segment
-+# OTHER_READONLY_SECTIONS - other than .text .init .rodata ...
-+# (e.g., .PARISC.milli)
-+# OTHER_TEXT_SECTIONS - these get put in .text when relocating
-+# OTHER_READWRITE_SECTIONS - other than .data .bss .ctors .sdata ...
-+# (e.g., .PARISC.global)
-+# OTHER_RELRO_SECTIONS - other than .data.rel.ro ...
-+# (e.g. PPC32 .fixup, .got[12])
-+# OTHER_BSS_SECTIONS - other than .bss .sbss ...
-+# ATTRS_SECTIONS - at the end
-+# OTHER_SECTIONS - at the end
-+# EXECUTABLE_SYMBOLS - symbols that must be defined for an
-+# executable (e.g., _DYNAMIC_LINK)
-+# TEXT_START_ADDR - the first byte of the text segment, after any
-+# headers.
-+# TEXT_BASE_ADDRESS - the first byte of the text segment.
-+# TEXT_START_SYMBOLS - symbols that appear at the start of the
-+# .text section.
-+# DATA_START_SYMBOLS - symbols that appear at the start of the
-+# .data section.
-+# DATA_END_SYMBOLS - symbols that appear at the end of the
-+# writeable data sections.
-+# OTHER_GOT_SYMBOLS - symbols defined just before .got.
-+# OTHER_GOT_SECTIONS - sections just after .got.
-+# OTHER_SDATA_SECTIONS - sections just after .sdata.
-+# OTHER_BSS_SYMBOLS - symbols that appear at the start of the
-+# .bss section besides __bss_start.
-+# DATA_PLT - .plt should be in data segment, not text segment.
-+# PLT_BEFORE_GOT - .plt just before .got when .plt is in data segement.
-+# BSS_PLT - .plt should be in bss segment
-+# TEXT_DYNAMIC - .dynamic in text segment, not data segment.
-+# EMBEDDED - whether this is for an embedded system.
-+# SHLIB_TEXT_START_ADDR - if set, add to SIZEOF_HEADERS to set
-+# start address of shared library.
-+# INPUT_FILES - INPUT command of files to always include
-+# WRITABLE_RODATA - if set, the .rodata section should be writable
-+# INIT_START, INIT_END - statements just before and just after
-+# combination of .init sections.
-+# FINI_START, FINI_END - statements just before and just after
-+# combination of .fini sections.
-+# STACK_ADDR - start of a .stack section.
-+# OTHER_SYMBOLS - symbols to place right at the end of the script.
-+# ETEXT_NAME - name of a symbol for the end of the text section,
-+# normally etext.
-+# SEPARATE_GOTPLT - if set, .got.plt should be separate output section,
-+# so that .got can be in the RELRO area. It should be set to
-+# the number of bytes in the beginning of .got.plt which can be
-+# in the RELRO area as well.
-+# USER_LABEL_PREFIX - prefix to add to user-visible symbols.
-+#
-+# When adding sections, do note that the names of some sections are used
-+# when specifying the start address of the next.
-+#
-+
-+# Many sections come in three flavours. There is the 'real' section,
-+# like ".data". Then there are the per-procedure or per-variable
-+# sections, generated by -ffunction-sections and -fdata-sections in GCC,
-+# and useful for --gc-sections, which for a variable "foo" might be
-+# ".data.foo". Then there are the linkonce sections, for which the linker
-+# eliminates duplicates, which are named like ".gnu.linkonce.d.foo".
-+# The exact correspondences are:
-+#
-+# Section Linkonce section
-+# .text .gnu.linkonce.t.foo
-+# .rodata .gnu.linkonce.r.foo
-+# .data .gnu.linkonce.d.foo
-+# .bss .gnu.linkonce.b.foo
-+# .sdata .gnu.linkonce.s.foo
-+# .sbss .gnu.linkonce.sb.foo
-+# .sdata2 .gnu.linkonce.s2.foo
-+# .sbss2 .gnu.linkonce.sb2.foo
-+# .debug_info .gnu.linkonce.wi.foo
-+# .tdata .gnu.linkonce.td.foo
-+# .tbss .gnu.linkonce.tb.foo
-+# .lrodata .gnu.linkonce.lr.foo
-+# .ldata .gnu.linkonce.l.foo
-+# .lbss .gnu.linkonce.lb.foo
-+#
-+# Each of these can also have corresponding .rel.* and .rela.* sections.
-+
-+test -z "$ENTRY" && ENTRY=_start
-+test -z "${BIG_OUTPUT_FORMAT}" && BIG_OUTPUT_FORMAT=${OUTPUT_FORMAT}
-+test -z "${LITTLE_OUTPUT_FORMAT}" && LITTLE_OUTPUT_FORMAT=${OUTPUT_FORMAT}
-+if [ -z "$MACHINE" ]; then OUTPUT_ARCH=${ARCH}; else OUTPUT_ARCH=${ARCH}:${MACHINE}; fi
-+test -z "${ELFSIZE}" && ELFSIZE=32
-+test -z "${ALIGNMENT}" && ALIGNMENT="${ELFSIZE} / 8"
-+test "$LD_FLAG" = "N" && DATA_ADDR=.
-+test -z "${ETEXT_NAME}" && ETEXT_NAME=etext
-+test -n "$CREATE_SHLIB$CREATE_PIE" && test -n "$SHLIB_DATA_ADDR" && COMMONPAGESIZE=""
-+test -z "$CREATE_SHLIB$CREATE_PIE" && test -n "$DATA_ADDR" && COMMONPAGESIZE=""
-+test -n "$RELRO_NOW" && unset SEPARATE_GOTPLT
-+test -z "$ATTRS_SECTIONS" && ATTRS_SECTIONS=".gnu.attributes 0 : { KEEP (*(.gnu.attributes)) }"
-+DATA_SEGMENT_ALIGN="ALIGN(${SEGMENT_SIZE})"
-+#DATA_SEGMENT_ALIGN="ALIGN(${SEGMENT_SIZE}) + (. & (${MAXPAGESIZE} - 1))"
-+DATA_SEGMENT_RELRO_END=""
-+DATA_SEGMENT_END=""
-+if test -n "${COMMONPAGESIZE}"; then
-+ DATA_SEGMENT_ALIGN="ALIGN (${SEGMENT_SIZE}) - ((${MAXPAGESIZE} - .) & (${MAXPAGESIZE} - 1)); . = DATA_SEGMENT_ALIGN (${MAXPAGESIZE}, ${COMMONPAGESIZE})"
-+ DATA_SEGMENT_END=". = DATA_SEGMENT_END (.);"
-+ DATA_SEGMENT_RELRO_END=". = DATA_SEGMENT_RELRO_END (${SEPARATE_GOTPLT-0}, .);"
-+fi
-+if test -z "${INITIAL_READONLY_SECTIONS}${CREATE_SHLIB}"; then
-+ INITIAL_READONLY_SECTIONS=".interp ${RELOCATING-0} : { *(.interp) }"
-+fi
-+if test -z "$PLT"; then
-+ PLT=".plt ${RELOCATING-0} : { *(.plt) }"
-+fi
-+test -n "${DATA_PLT-${BSS_PLT-text}}" && TEXT_PLT=yes
-+if test -z "$GOT"; then
-+ if test -z "$SEPARATE_GOTPLT"; then
-+ GOT=".got ${RELOCATING-0} : { *(.got.plt) *(.got) }"
-+ else
-+ GOT=".got ${RELOCATING-0} : { *(.got) }"
-+ GOTPLT=".got.plt ${RELOCATING-0} : { *(.got.plt) }"
-+ fi
-+fi
-+DYNAMIC=".dynamic ${RELOCATING-0} : { *(.dynamic) }"
-+RODATA=".rodata ${RELOCATING-0} : { *(.rodata${RELOCATING+ .rodata.* .gnu.linkonce.r.*}) }"
-+DATARELRO=".data.rel.ro : { *(.data.rel.ro.local* .gnu.linkonce.d.rel.ro.local.*) *(.data.rel.ro* .gnu.linkonce.d.rel.ro.*) }"
-+DISCARDED="/DISCARD/ : { *(.note.GNU-stack) *(.gnu_debuglink) }"
-+if test -z "${NO_SMALL_DATA}"; then
-+ SBSS=".sbss ${RELOCATING-0} :
-+ {
-+ ${RELOCATING+${SBSS_START_SYMBOLS}}
-+ ${CREATE_SHLIB+*(.sbss2 .sbss2.* .gnu.linkonce.sb2.*)}
-+ *(.dynsbss)
-+ *(.sbss${RELOCATING+ .sbss.* .gnu.linkonce.sb.*})
-+ *(.scommon)
-+ ${RELOCATING+${SBSS_END_SYMBOLS}}
-+ }"
-+ SBSS2=".sbss2 ${RELOCATING-0} : { *(.sbss2${RELOCATING+ .sbss2.* .gnu.linkonce.sb2.*}) }"
-+ SDATA="/* We want the small data sections together, so single-instruction offsets
-+ can access them all, and initialized data all before uninitialized, so
-+ we can shorten the on-disk segment size. */
-+ .sdata ${RELOCATING-0} :
-+ {
-+ ${RELOCATING+${SDATA_START_SYMBOLS}}
-+ ${CREATE_SHLIB+*(.sdata2 .sdata2.* .gnu.linkonce.s2.*)}
-+ *(.sdata${RELOCATING+ .sdata.* .gnu.linkonce.s.*})
-+ }"
-+ SDATA2=".sdata2 ${RELOCATING-0} :
-+ {
-+ ${RELOCATING+${SDATA2_START_SYMBOLS}}
-+ *(.sdata2${RELOCATING+ .sdata2.* .gnu.linkonce.s2.*})
-+ }"
-+ REL_SDATA=".rel.sdata ${RELOCATING-0} : { *(.rel.sdata${RELOCATING+ .rel.sdata.* .rel.gnu.linkonce.s.*}) }
-+ .rela.sdata ${RELOCATING-0} : { *(.rela.sdata${RELOCATING+ .rela.sdata.* .rela.gnu.linkonce.s.*}) }"
-+ REL_SBSS=".rel.sbss ${RELOCATING-0} : { *(.rel.sbss${RELOCATING+ .rel.sbss.* .rel.gnu.linkonce.sb.*}) }
-+ .rela.sbss ${RELOCATING-0} : { *(.rela.sbss${RELOCATING+ .rela.sbss.* .rela.gnu.linkonce.sb.*}) }"
-+ REL_SDATA2=".rel.sdata2 ${RELOCATING-0} : { *(.rel.sdata2${RELOCATING+ .rel.sdata2.* .rel.gnu.linkonce.s2.*}) }
-+ .rela.sdata2 ${RELOCATING-0} : { *(.rela.sdata2${RELOCATING+ .rela.sdata2.* .rela.gnu.linkonce.s2.*}) }"
-+ REL_SBSS2=".rel.sbss2 ${RELOCATING-0} : { *(.rel.sbss2${RELOCATING+ .rel.sbss2.* .rel.gnu.linkonce.sb2.*}) }
-+ .rela.sbss2 ${RELOCATING-0} : { *(.rela.sbss2${RELOCATING+ .rela.sbss2.* .rela.gnu.linkonce.sb2.*}) }"
-+else
-+ NO_SMALL_DATA=" "
-+fi
-+if test -z "${DATA_GOT}"; then
-+ if test -n "${NO_SMALL_DATA}"; then
-+ DATA_GOT=" "
-+ fi
-+fi
-+if test -z "${SDATA_GOT}"; then
-+ if test -z "${NO_SMALL_DATA}"; then
-+ SDATA_GOT=" "
-+ fi
-+fi
-+test -n "$SEPARATE_GOTPLT" && SEPARATE_GOTPLT=" "
-+test "${LARGE_SECTIONS}" = "yes" && REL_LARGE="
-+ .rel.ldata ${RELOCATING-0} : { *(.rel.ldata${RELOCATING+ .rel.ldata.* .rel.gnu.linkonce.l.*}) }
-+ .rela.ldata ${RELOCATING-0} : { *(.rela.ldata${RELOCATING+ .rela.ldata.* .rela.gnu.linkonce.l.*}) }
-+ .rel.lbss ${RELOCATING-0} : { *(.rel.lbss${RELOCATING+ .rel.lbss.* .rel.gnu.linkonce.lb.*}) }
-+ .rela.lbss ${RELOCATING-0} : { *(.rela.lbss${RELOCATING+ .rela.lbss.* .rela.gnu.linkonce.lb.*}) }
-+ .rel.lrodata ${RELOCATING-0} : { *(.rel.lrodata${RELOCATING+ .rel.lrodata.* .rel.gnu.linkonce.lr.*}) }
-+ .rela.lrodata ${RELOCATING-0} : { *(.rela.lrodata${RELOCATING+ .rela.lrodata.* .rela.gnu.linkonce.lr.*}) }"
-+test "${LARGE_SECTIONS}" = "yes" && OTHER_BSS_SECTIONS="
-+ ${OTHER_BSS_SECTIONS}
-+ .lbss ${RELOCATING-0} :
-+ {
-+ *(.dynlbss)
-+ *(.lbss${RELOCATING+ .lbss.* .gnu.linkonce.lb.*})
-+ *(LARGE_COMMON)
-+ }"
-+test "${LARGE_SECTIONS}" = "yes" && LARGE_SECTIONS="
-+ .lrodata ${RELOCATING-0} ${RELOCATING+ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))} :
-+ {
-+ *(.lrodata${RELOCATING+ .lrodata.* .gnu.linkonce.lr.*})
-+ }
-+ .ldata ${RELOCATING-0} ${RELOCATING+ALIGN(${MAXPAGESIZE}) + (. & (${MAXPAGESIZE} - 1))} :
-+ {
-+ *(.ldata${RELOCATING+ .ldata.* .gnu.linkonce.l.*})
-+ ${RELOCATING+. = ALIGN(. != 0 ? ${ALIGNMENT} : 1);}
-+ }"
-+CTOR=".ctors ${CONSTRUCTING-0} :
-+ {
-+ ${CONSTRUCTING+${CTOR_START}}
-+ /* gcc uses crtbegin.o to find the start of
-+ the constructors, so we make sure it is
-+ first. Because this is a wildcard, it
-+ doesn't matter if the user does not
-+ actually link against crtbegin.o; the
-+ linker won't look for a file to match a
-+ wildcard. The wildcard also means that it
-+ doesn't matter which directory crtbegin.o
-+ is in. */
-+
-+ KEEP (*crtbegin.o(.ctors))
-+ KEEP (*crtbegin?.o(.ctors))
-+
-+ /* We don't want to include the .ctor section from
-+ the crtend.o file until after the sorted ctors.
-+ The .ctor section from the crtend file contains the
-+ end of ctors marker and it must be last */
-+
-+ KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .ctors))
-+ KEEP (*(SORT(.ctors.*)))
-+ KEEP (*(.ctors))
-+ ${CONSTRUCTING+${CTOR_END}}
-+ }"
-+DTOR=".dtors ${CONSTRUCTING-0} :
-+ {
-+ ${CONSTRUCTING+${DTOR_START}}
-+ KEEP (*crtbegin.o(.dtors))
-+ KEEP (*crtbegin?.o(.dtors))
-+ KEEP (*(EXCLUDE_FILE (*crtend.o *crtend?.o $OTHER_EXCLUDE_FILES) .dtors))
-+ KEEP (*(SORT(.dtors.*)))
-+ KEEP (*(.dtors))
-+ ${CONSTRUCTING+${DTOR_END}}
-+ }"
-+STACK=" .stack ${RELOCATING-0}${RELOCATING+${STACK_ADDR}} :
-+ {
-+ ${RELOCATING+_stack = .;}
-+ *(.stack)
-+ }"
-+
-+# if this is for an embedded system, don't add SIZEOF_HEADERS.
-+if [ -z "$EMBEDDED" ]; then
-+ test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR} + SIZEOF_HEADERS"
-+else
-+ test -z "${TEXT_BASE_ADDRESS}" && TEXT_BASE_ADDRESS="${TEXT_START_ADDR}"
-+fi
-+
-+cat <<EOF
-+OUTPUT_FORMAT("${OUTPUT_FORMAT}", "${BIG_OUTPUT_FORMAT}",
-+ "${LITTLE_OUTPUT_FORMAT}")
-+OUTPUT_ARCH(${OUTPUT_ARCH})
-+ENTRY(${ENTRY})
-+
-+${RELOCATING+${LIB_SEARCH_DIRS}}
-+${RELOCATING+${EXECUTABLE_SYMBOLS}}
-+${RELOCATING+${INPUT_FILES}}
-+${RELOCATING- /* For some reason, the Solaris linker makes bad executables
-+ if gld -r is used and the intermediate file has sections starting
-+ at non-zero addresses. Could be a Solaris ld bug, could be a GNU ld
-+ bug. But for now assigning the zero vmas works. */}
-+
-+SECTIONS
-+{
-+ /* Read-only sections, merged into text segment: */
-+ ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+PROVIDE (__executable_start = ${TEXT_START_ADDR}); . = ${TEXT_BASE_ADDRESS};}}}
-+ ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}}
-+ ${CREATE_PIE+${RELOCATING+. = ${SHLIB_TEXT_START_ADDR:-0} + SIZEOF_HEADERS;}}
-+ ${INITIAL_READONLY_SECTIONS}
-+ .note.gnu.build-id : { *(.note.gnu.build-id) }
-+ ${TEXT_DYNAMIC+${DYNAMIC}}
-+ .hash ${RELOCATING-0} : { *(.hash) }
-+ .gnu.hash ${RELOCATING-0} : { *(.gnu.hash) }
-+ .dynsym ${RELOCATING-0} : { *(.dynsym) }
-+ .dynstr ${RELOCATING-0} : { *(.dynstr) }
-+ .gnu.version ${RELOCATING-0} : { *(.gnu.version) }
-+ .gnu.version_d ${RELOCATING-0}: { *(.gnu.version_d) }
-+ .gnu.version_r ${RELOCATING-0}: { *(.gnu.version_r) }
-+
-+EOF
-+if [ "x$COMBRELOC" = x ]; then
-+ COMBRELOCCAT=cat
-+else
-+ COMBRELOCCAT="cat > $COMBRELOC"
-+fi
-+eval $COMBRELOCCAT <<EOF
-+ .rel.init ${RELOCATING-0} : { *(.rel.init) }
-+ .rela.init ${RELOCATING-0} : { *(.rela.init) }
-+ .rel.text ${RELOCATING-0} : { *(.rel.text${RELOCATING+ .rel.text.* .rel.gnu.linkonce.t.*}) }
-+ .rela.text ${RELOCATING-0} : { *(.rela.text${RELOCATING+ .rela.text.* .rela.gnu.linkonce.t.*}) }
-+ .rel.fini ${RELOCATING-0} : { *(.rel.fini) }
-+ .rela.fini ${RELOCATING-0} : { *(.rela.fini) }
-+ .rel.rodata ${RELOCATING-0} : { *(.rel.rodata${RELOCATING+ .rel.rodata.* .rel.gnu.linkonce.r.*}) }
-+ .rela.rodata ${RELOCATING-0} : { *(.rela.rodata${RELOCATING+ .rela.rodata.* .rela.gnu.linkonce.r.*}) }
-+ ${OTHER_READONLY_RELOC_SECTIONS}
-+ .rel.data.rel.ro ${RELOCATING-0} : { *(.rel.data.rel.ro${RELOCATING+* .rel.gnu.linkonce.d.rel.ro.*}) }
-+ .rela.data.rel.ro ${RELOCATING-0} : { *(.rela.data.rel.ro${RELOCATING+* .rela.gnu.linkonce.d.rel.ro.*}) }
-+ .rel.data ${RELOCATING-0} : { *(.rel.data${RELOCATING+ .rel.data.* .rel.gnu.linkonce.d.*}) }
-+ .rela.data ${RELOCATING-0} : { *(.rela.data${RELOCATING+ .rela.data.* .rela.gnu.linkonce.d.*}) }
-+ .rel.tdata ${RELOCATING-0} : { *(.rel.tdata${RELOCATING+ .rel.tdata.* .rel.gnu.linkonce.td.*}) }
-+ .rela.tdata ${RELOCATING-0} : { *(.rela.tdata${RELOCATING+ .rela.tdata.* .rela.gnu.linkonce.td.*}) }
-+ .rel.tbss ${RELOCATING-0} : { *(.rel.tbss${RELOCATING+ .rel.tbss.* .rel.gnu.linkonce.tb.*}) }
-+ .rela.tbss ${RELOCATING-0} : { *(.rela.tbss${RELOCATING+ .rela.tbss.* .rela.gnu.linkonce.tb.*}) }
-+ .rel.ctors ${RELOCATING-0} : { *(.rel.ctors) }
-+ .rela.ctors ${RELOCATING-0} : { *(.rela.ctors) }
-+ .rel.dtors ${RELOCATING-0} : { *(.rel.dtors) }
-+ .rela.dtors ${RELOCATING-0} : { *(.rela.dtors) }
-+ .rel.got ${RELOCATING-0} : { *(.rel.got) }
-+ .rela.got ${RELOCATING-0} : { *(.rela.got) }
-+ ${OTHER_GOT_RELOC_SECTIONS}
-+ ${REL_SDATA}
-+ ${REL_SBSS}
-+ ${REL_SDATA2}
-+ ${REL_SBSS2}
-+ .rel.bss ${RELOCATING-0} : { *(.rel.bss${RELOCATING+ .rel.bss.* .rel.gnu.linkonce.b.*}) }
-+ .rela.bss ${RELOCATING-0} : { *(.rela.bss${RELOCATING+ .rela.bss.* .rela.gnu.linkonce.b.*}) }
-+ ${REL_LARGE}
-+EOF
-+if [ -n "$COMBRELOC" ]; then
-+cat <<EOF
-+ .rel.dyn ${RELOCATING-0} :
-+ {
-+EOF
-+sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rela\./d;s/^.*: { *\(.*\)}$/ \1/' $COMBRELOC
-+cat <<EOF
-+ }
-+ .rela.dyn ${RELOCATING-0} :
-+ {
-+EOF
-+sed -e '/^[ ]*[{}][ ]*$/d;/:[ ]*$/d;/\.rel\./d;s/^.*: { *\(.*\)}/ \1/' $COMBRELOC
-+cat <<EOF
-+ }
-+EOF
-+fi
-+cat <<EOF
-+ .rel.plt ${RELOCATING-0} : { *(.rel.plt) }
-+ .rela.plt ${RELOCATING-0} : { *(.rela.plt) }
-+ ${OTHER_PLT_RELOC_SECTIONS}
-+
-+ .init ${RELOCATING-0} :
-+ {
-+ ${RELOCATING+${INIT_START}}
-+ KEEP (*(.init))
-+ ${RELOCATING+${INIT_END}}
-+ } =${NOP-0}
-+
-+ ${TINY_READONLY_SECTION}
-+ .text ${RELOCATING-0} :
-+ {
-+ ${RELOCATING+${TEXT_START_SYMBOLS}}
-+ *(.text .stub${RELOCATING+ .text.* .gnu.linkonce.t.*})
-+ KEEP (*(.text.*personality*))
-+ /* .gnu.warning sections are handled specially by elf32.em. */
-+ *(.gnu.warning)
-+ ${RELOCATING+${OTHER_TEXT_SECTIONS}}
-+ } =${NOP-0}
-+ . = ALIGN(4096);
-+ ${TEXT_PLT+${PLT}}
-+ . = ALIGN(4096);
-+ .fini ${RELOCATING-0} :
-+ {
-+ ${RELOCATING+${FINI_START}}
-+ KEEP (*(.fini))
-+ ${RELOCATING+${FINI_END}}
-+ } =${NOP-0}
-+ ${RELOCATING+PROVIDE (__${ETEXT_NAME} = .);}
-+ ${RELOCATING+PROVIDE (_${ETEXT_NAME} = .);}
-+ ${RELOCATING+PROVIDE (${ETEXT_NAME} = .);}
-+ ${WRITABLE_RODATA-${RODATA}}
-+ .rodata1 ${RELOCATING-0} : { *(.rodata1) }
-+ ${CREATE_SHLIB-${SDATA2}}
-+ ${CREATE_SHLIB-${SBSS2}}
-+ ${OTHER_READONLY_SECTIONS}
-+ .eh_frame_hdr : { *(.eh_frame_hdr) }
-+ .eh_frame ${RELOCATING-0} : ONLY_IF_RO { KEEP (*(.eh_frame)) }
-+ .gcc_except_table ${RELOCATING-0} : ONLY_IF_RO { *(.gcc_except_table .gcc_except_table.*) }
-+
-+ /* Adjust the address for the data segment. We want to adjust up to
-+ the same address within the page on the next page up. */
-+ ${CREATE_SHLIB-${CREATE_PIE-${RELOCATING+. = ${DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}}
-+ ${CREATE_SHLIB+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}
-+ ${CREATE_PIE+${RELOCATING+. = ${SHLIB_DATA_ADDR-${DATA_SEGMENT_ALIGN}};}}
-+
-+ /* Exception handling */
-+ .eh_frame ${RELOCATING-0} : ONLY_IF_RW { KEEP (*(.eh_frame)) }
-+ .gcc_except_table ${RELOCATING-0} : ONLY_IF_RW { *(.gcc_except_table .gcc_except_table.*) }
-+
-+ /* Thread Local Storage sections */
-+ .tdata ${RELOCATING-0} : { *(.tdata${RELOCATING+ .tdata.* .gnu.linkonce.td.*}) }
-+ .tbss ${RELOCATING-0} : { *(.tbss${RELOCATING+ .tbss.* .gnu.linkonce.tb.*})${RELOCATING+ *(.tcommon)} }
-+
-+ .preinit_array ${RELOCATING-0} :
-+ {
-+ ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__preinit_array_start = .);}}
-+ KEEP (*(.preinit_array))
-+ ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__preinit_array_end = .);}}
-+ }
-+ .init_array ${RELOCATING-0} :
-+ {
-+ ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__init_array_start = .);}}
-+ KEEP (*(SORT(.init_array.*)))
-+ KEEP (*(.init_array))
-+ ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__init_array_end = .);}}
-+ }
-+ .fini_array ${RELOCATING-0} :
-+ {
-+ ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__fini_array_start = .);}}
-+ KEEP (*(.fini_array))
-+ KEEP (*(SORT(.fini_array.*)))
-+ ${RELOCATING+${CREATE_SHLIB-PROVIDE_HIDDEN (${USER_LABEL_PREFIX}__fini_array_end = .);}}
-+ }
-+ ${SMALL_DATA_CTOR-${RELOCATING+${CTOR}}}
-+ ${SMALL_DATA_DTOR-${RELOCATING+${DTOR}}}
-+ .jcr ${RELOCATING-0} : { KEEP (*(.jcr)) }
-+
-+ ${RELOCATING+${DATARELRO}}
-+ ${OTHER_RELRO_SECTIONS}
-+ ${TEXT_DYNAMIC-${DYNAMIC}}
-+ ${DATA_GOT+${RELRO_NOW+${GOT}}}
-+ ${DATA_GOT+${RELRO_NOW+${GOTPLT}}}
-+ ${DATA_GOT+${RELRO_NOW-${SEPARATE_GOTPLT+${GOT}}}}
-+ ${RELOCATING+${DATA_SEGMENT_RELRO_END}}
-+ ${DATA_GOT+${RELRO_NOW-${SEPARATE_GOTPLT-${GOT}}}}
-+ ${DATA_GOT+${RELRO_NOW-${GOTPLT}}}
-+
-+ ${DATA_PLT+${PLT_BEFORE_GOT-${PLT}}}
-+
-+ .data ${RELOCATING-0} :
-+ {
-+ ${RELOCATING+${DATA_START_SYMBOLS}}
-+ *(.data${RELOCATING+ .data.* .gnu.linkonce.d.*})
-+ ${RELOCATING+KEEP (*(.gnu.linkonce.d.*personality*))}
-+ ${CONSTRUCTING+SORT(CONSTRUCTORS)}
-+ }
-+ .data1 ${RELOCATING-0} : { *(.data1) }
-+ ${WRITABLE_RODATA+${RODATA}}
-+ ${OTHER_READWRITE_SECTIONS}
-+ ${SMALL_DATA_CTOR+${RELOCATING+${CTOR}}}
-+ ${SMALL_DATA_DTOR+${RELOCATING+${DTOR}}}
-+ ${DATA_PLT+${PLT_BEFORE_GOT+${PLT}}}
-+ ${SDATA_GOT+${RELOCATING+${OTHER_GOT_SYMBOLS}}}
-+ ${SDATA_GOT+${GOT}}
-+ ${SDATA_GOT+${OTHER_GOT_SECTIONS}}
-+ ${SDATA}
-+ ${OTHER_SDATA_SECTIONS}
-+ ${RELOCATING+${DATA_END_SYMBOLS-${USER_LABEL_PREFIX}_edata = .; PROVIDE (${USER_LABEL_PREFIX}edata = .);}}
-+ ${RELOCATING+__bss_start = .;}
-+ ${RELOCATING+${OTHER_BSS_SYMBOLS}}
-+ ${SBSS}
-+ ${BSS_PLT+${PLT}}
-+ .bss ${RELOCATING-0} :
-+ {
-+ *(.dynbss)
-+ *(.bss${RELOCATING+ .bss.* .gnu.linkonce.b.*})
-+ *(COMMON)
-+ /* Align here to ensure that the .bss section occupies space up to
-+ _end. Align after .bss to ensure correct alignment even if the
-+ .bss section disappears because there are no input sections.
-+ FIXME: Why do we need it? When there is no .bss section, we don't
-+ pad the .data section. */
-+ ${RELOCATING+. = ALIGN(. != 0 ? ${ALIGNMENT} : 1);}
-+ }
-+ ${OTHER_BSS_SECTIONS}
-+ ${RELOCATING+${OTHER_BSS_END_SYMBOLS}}
-+ ${RELOCATING+. = ALIGN(${ALIGNMENT});}
-+ ${LARGE_SECTIONS}
-+ ${RELOCATING+. = ALIGN(${ALIGNMENT});}
-+ ${RELOCATING+${OTHER_END_SYMBOLS}}
-+ ${RELOCATING+${END_SYMBOLS-${USER_LABEL_PREFIX}_end = .; PROVIDE (${USER_LABEL_PREFIX}end = .);}}
-+ ${RELOCATING+${DATA_SEGMENT_END}}
-+
-+ /* Stabs debugging sections. */
-+ .stab 0 : { *(.stab) }
-+ .stabstr 0 : { *(.stabstr) }
-+ .stab.excl 0 : { *(.stab.excl) }
-+ .stab.exclstr 0 : { *(.stab.exclstr) }
-+ .stab.index 0 : { *(.stab.index) }
-+ .stab.indexstr 0 : { *(.stab.indexstr) }
-+
-+ .comment 0 : { *(.comment) }
-+
-+ /* DWARF debug sections.
-+ Symbols in the DWARF debugging sections are relative to the beginning
-+ of the section so we begin them at 0. */
-+
-+ /* DWARF 1 */
-+ .debug 0 : { *(.debug) }
-+ .line 0 : { *(.line) }
-+
-+ /* GNU DWARF 1 extensions */
-+ .debug_srcinfo 0 : { *(.debug_srcinfo) }
-+ .debug_sfnames 0 : { *(.debug_sfnames) }
-+
-+ /* DWARF 1.1 and DWARF 2 */
-+ .debug_aranges 0 : { *(.debug_aranges) }
-+ .debug_pubnames 0 : { *(.debug_pubnames) }
-+
-+ /* DWARF 2 */
-+ .debug_info 0 : { *(.debug_info${RELOCATING+ .gnu.linkonce.wi.*}) }
-+ .debug_abbrev 0 : { *(.debug_abbrev) }
-+ .debug_line 0 : { *(.debug_line) }
-+ .debug_frame 0 : { *(.debug_frame) }
-+ .debug_str 0 : { *(.debug_str) }
-+ .debug_loc 0 : { *(.debug_loc) }
-+ .debug_macinfo 0 : { *(.debug_macinfo) }
-+
-+ /* SGI/MIPS DWARF 2 extensions */
-+ .debug_weaknames 0 : { *(.debug_weaknames) }
-+ .debug_funcnames 0 : { *(.debug_funcnames) }
-+ .debug_typenames 0 : { *(.debug_typenames) }
-+ .debug_varnames 0 : { *(.debug_varnames) }
-+
-+ /* DWARF 3 */
-+ .debug_pubtypes 0 : { *(.debug_pubtypes) }
-+ .debug_ranges 0 : { *(.debug_ranges) }
-+
-+ ${TINY_DATA_SECTION}
-+ ${TINY_BSS_SECTION}
-+
-+ ${STACK_ADDR+${STACK}}
-+ ${ATTRS_SECTIONS}
-+ ${OTHER_SECTIONS}
-+ ${RELOCATING+${OTHER_SYMBOLS}}
-+ ${RELOCATING+${DISCARDED}}
-+}
-+EOF
+